Autel AP200 Bluetooth OBD2 Scanner





Does it apply to my car?

1. Show us your car model and which function you want ; Our service will conifrm with u

2. Check in Link :

https://www.autel.com/vehicle-coverage/coverage2

3.Not all models under the same brand are supported

How to Use it ?

1. Download and install the app-MaxiAP200 in Google Play or App Store to your device;

2. Register and log in the MaxiAP200 APP;

3. Get one free car software through Mall after binding VCI for the first time;

4. Plug the MaxiAP200 tool into the vehicle’s Data Link Connector (DLC);

5. Turn on the vehicle ignition while turn the engine off;

6. Tap Me/Setting button of your device to pair the MaxiAP AP200 with your device;

7. Start to diagnose your car.

How to change Language ?

Language Support :
English , Traditional Chinese ,French ,German,Spanish , Portuguese , Dutch, Polish, Swedish, Korean, Japanese , Russian, Italian

Autel AP200 language is synchronized with the phone language ; Change your mobile phone language then AP200 language will update

Warranty : 12 Monthes

 

Autel AP200  OBD2 Scanner Code Reader with Full Systems Diagnoses, AutoVIN, Oil/EPB/BMS/SAS/TPMS/DPF Resets IMMO Service for Family DIY users

ONLY ONE SOFTWARE IS AVAILABLE FOR LIFETIME!!!

Other software is charged in the APP.

Version Declaration:

Android: V2.03

IOS: V2.03

 Breif Introduction

 

All SYSTEMS DIAGNOSES

Read and erase codes for all available systems using the supported protocols. The tablet type MaxiCOM diagnostic tool is the best way to display live data in text, graph & analog for easy data review

To diagnose Brake Systemif you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

To diagnose Emission Systemif the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

To diagnose Fuel systemif vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

To diagnose Transmissionif your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

To diagnose Wiper Systemif you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

To diagnoseLight Systemif you see rapid signal blinking or dimming lights.

And many more ...

 

ADVANCED RESET SERVICES

This OBD2 scanner is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. There is some commonly-used special reset services are listed for your reference:
Oil Reset –Perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.
EPB Reset –Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
BMS Reset –Evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
SAS Reset –perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the sensor EEPROM.
TPMS Reset –quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.
IMMO Service - Disable the lost vehicle keys and program the replacement key fob.
DPF Regeneration –Manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

 

COMPLETE OBD2 FUNCTIONS

THE OPERATING PROCEDURES

1. Download and install the app-MaxiAP200 in Google Play or App Store to your device;
2. Register and log in the MaxiAP200 APP;
3. Get one free car software through Mall after binding VCI for the first time;
4. Plug the MaxiAP200 tool into the vehicle’s Data Link Connector (DLC);
5. Turn on the vehicle ignition while turn the engine off;
6. Tap Me/Setting button of your device to pair the MaxiAP AP200 with your device;
7. Start to diagnose your car.




Specifications

Communications: BL 4.2 Dual-Mode
Wireless Frequency: 2.4 GHz
Input Voltage Range: 9 VDC to 26 VDC
Supply Current: 100mA@12V
Sleep Mode Current: 3mA@12V
Operating Temp.: 0°C to 50°C
Storage Temp.: -20°C to 70°C
Length\Width\Height: 59.2 mm (2.33”) * 48.5 mm (1.91’’) * 24.6 mm (0.97’’)
Weight: 35g (0.07 lb.)"
Navigation